6/28/2017 Day 2 - Detail, service & wheel wellsToday, I lifted the car and performed an oil change. I used the wooden cribs seen in photo above to lift the car 6" before putting it on my Esco stands which have a minimum height of 13" inches. I used the rear jack point to lift the front onto stands, then the center rear jack point under the engine to lift both rear wheels onto stands.
6/26/2017 Day 1 - Detail, strip wash & wheel waxI recently decided that I need to correct the swirl marks in my Ocean Blue Metallic 986. The car has never been polished or had any paint correction, but I have always kept it clean and waxed. To begin my multi-day detail, I first needed to thoroughly wash the car and strip any remaining wax or sealant from the paint. I began early to avoid the heat.
|
Disclaimer
This website is a personal project, and any information contained on this website should be independently verified. I accept no liability and/or responsibility for the accuracy of any information on this website, and/or any damage you incur from reading or following any of the information on this website. This website contains documentation of my own modifications, upgrades, and other work, however your results may differ. I encourage everyone to do their own research and verify any information themselves. This website may be directly linked to without specific permission, but the contents may not be copied, hosted, transmitted, etc in any medium without express permission. Thank you! |